|
Author
|
Topic: Computer Help - Part Lucky 13
|
Keaner Member
|
posted August 07, 2009 04:03 AM
  
quote: Originally posted by Jazaray: Ok, my friend is having some problems with his browser. [10:17:07 PM] lad: The heading is: [10:17:17 PM] lad: Default Search Engine Protection [10:17:49 PM] lad: An unknown application is trying to change your default search engine. [10:18:34 PM] lad: changing these settings controls the way internet explorer treats search queries [10:18:40 PM] lad: What would you like to do? He ran a check for virus' and spyware, it came up nothing. Any ideas? Thanks, Jazaray
First two and easiest things to try are uninstalling any and all add on tool bars your friend has on his browser. ie google tool bar, yahoo search bar, etc. If he doesn't have anything installed, then I would try a different spyware program. I like using super anti spyware. It's free and doesn't leave behind certain spyware files like many other free spyware softwares. Edit: Also try going through the recently installed programs if the above doesn't work for you. There could be something in there trying to change your page.
[Edited 1 times, lastly by Keaner on August 07, 2009]
 |
PBallPsycho Member
|
posted August 07, 2009 06:35 AM

Also, what did he run his check with? I would recommend using MalwareBytes. If he's unable to open, install, or run MalwareBytes for any reason, most likely it's a virus blocking the program. Malware can be used with Safe Mode, and I would recommend trying that second.
|
TheMidnightBomber Member
|
posted August 16, 2009 01:00 PM

I recently used my printer( a hp photosmart c4280 ) to print on thick paper for an art project. I'd estimate the paper was 1.5 - 2.0 x the thickness of a standard index card. Now when I try to print normally, it often gets jammed or takes in too many sheets. Anyone know if there is a reasonably easy way to fix this or should I just invest in a new printer?
|
evilempire22 Member
|
posted August 20, 2009 05:55 PM
  
If I have Windows XP installed on one machine, is it possible to transfer that install of the OS to another machine using the same key? I am having a new computer built for me, and my current one I want to use for Linux and am wondering if I can basically "move" my OS to the new machine.--Evil __________________ I am become Death, the destroyer of worlds. Living is easy with eyes closed, misunderstanding all you see. Magic H/W List
|
zeramous Member
|
posted August 20, 2009 06:23 PM

quote: Originally posted by evilempire22: If I have Windows XP installed on one machine, is it possible to transfer that install of the OS to another machine using the same key? I am having a new computer built for me, and my current one I want to use for Linux and am wondering if I can basically "move" my OS to the new machine.--Evil
Not really because of drivers, it will pretty much crash. I don't know if you care or not, but under the EULA for windows, you are allowed to install/reinstall the OS only on/with the same processor, you can change everything else, but after that they "require" you to purchase a new product key. But that is only if you care about legalities. Personally I think they sabotage transfers.
[Edited 1 times, lastly by zeramous on August 20, 2009]
|
Wagamer Member
|
posted August 20, 2009 07:26 PM

quote: Originally posted by TheMidnightBomber: I recently used my printer( a hp photosmart c4280 ) to print on thick paper for an art project. I'd estimate the paper was 1.5 - 2.0 x the thickness of a standard index card. Now when I try to print normally, it often gets jammed or takes in too many sheets. Anyone know if there is a reasonably easy way to fix this or should I just invest in a new printer?
perhaps just going in and manually pushing down on the feeder will fix the problem
|
Volcanon Member
|
posted August 21, 2009 02:12 AM

quote: Originally posted by zeramous: Not really because of drivers, it will pretty much crash. I don't know if you care or not, but under the EULA for windows, you are allowed to install/reinstall the OS only on/with the same processor, you can change everything else, but after that they "require" you to purchase a new product key. But that is only if you care about legalities. Personally I think they sabotage transfers.
My copy of XP installed fine on: 1) My old pc, which was some flavor of AMD running at 2 ghz 2) Another pc, with a PIII 3) A third pc, with a celeron 4) most recently, a MacBook running duo core at 2.33 ghz. No issues at all. All of course not consecutively. quote: Originally posted by TheMidnightBomber: I recently used my printer( a hp photosmart c4280 ) to print on thick paper for an art project. I'd estimate the paper was 1.5 - 2.0 x the thickness of a standard index card. Now when I try to print normally, it often gets jammed or takes in too many sheets. Anyone know if there is a reasonably easy way to fix this or should I just invest in a new printer?
Check to see if there is some adjustable feeder thingy. Your big paper probably pushed it farther open than normal, which would cause the problems you're having now. On HP LaserJets, there's a tab for page thickness, page width, and number of pages. Dunno about your brand tho.
[Edited 1 times, lastly by Volcanon on August 21, 2009]
 |
Keaner Member
|
posted August 21, 2009 09:27 AM
  
quote: Originally posted by evilempire22: If I have Windows XP installed on one machine, is it possible to transfer that install of the OS to another machine using the same key? I am having a new computer built for me, and my current one I want to use for Linux and am wondering if I can basically "move" my OS to the new machine.--Evil
As far as I know you should be able to create an image of your computer and install the image on your second box. The only software I've used that can do this is Norton Ghost but there are many others. As far as the XP key goes, you should be able to install on any number of machines. I've had mine on 2 machines at home for over 5 years and no problems have come up. I have heard it directly from MS that they don't care about Joe Blow having the same copy of XP running on 2-3 machines at home. quote: Originally posted by Wagamer: perhaps just going in and manually pushing down on the feeder will fix the problem
If it really comes down to it and you can't find a fix, try using only one sheet at a time and see if that jams.
[Edited 1 times, lastly by Keaner on August 21, 2009]
 |
zeramous Member
|
posted August 21, 2009 10:10 AM

quote: Originally posted by Volcanon: My copy of XP installed fine on: 1) My old pc, which was some flavor of AMD running at 2 ghz 2) Another pc, with a PIII 3) A third pc, with a celeron 4) most recently, a MacBook running duo core at 2.33 ghz.No issues at all. All of course not consecutively.
He said transfer, not install/reinstall, that is a completely different thing. Good luck with shadowing if you decide to do that.
|
cerberus Moderator
|
posted August 26, 2009 06:53 PM

Does a system restore (to a previous date) effectively remove spyware?I have my doubts, but it seems to have worked for me... __________________ "Think for Yourself. Question Authority." cerberus
|
Keaner Member
|
posted August 27, 2009 04:39 AM
  
quote: Originally posted by cerberus: Does a system restore (to a previous date) effectively remove spyware?I have my doubts, but it seems to have worked for me...
Generally speaking, no. It may undo some of the things spyware will change but it should not get rid of any infected files. Try running malware bytes or super antispyware to see if anything is detected.
|
Wagamer Member
|
posted August 27, 2009 05:07 AM

quote: Originally posted by cerberus: Does a system restore (to a previous date) effectively remove spyware?I have my doubts, but it seems to have worked for me...
from wiki.. "System Restore by default does not allow other applications or users to modify or delete files in the directory where the restore points are saved for data integrity purposes. Since its method of backup is fairly simplistic, it may end up archiving malicious software such as a virus, worm or other types of malware. In this case, the anti-virus software may be unable to remove the infected files. [10] The only way to delete the infection is to disable System Restore, which will result in losing all saved restore points, or simply wait until Windows deletes the restore points to make room for new restore points. Moreover, if an infected set of files is restored, the virus may end up getting restored too."
|
DerangedHermit Member
|
posted September 01, 2009 01:25 PM

Argh, my internet connection is spazzing out. I can access this and a few other sites just fine, but I can't access Yahoo, Youtube, Something Awful, MTG.com and other various stuff. Keeps on saying "The connection has been reset."Ugh.
|
Ml490 Member
|
posted September 04, 2009 08:45 AM

Any one know any tips and tricks to reduce teh heat generation on a laptop and to increase battery life?Thanks -Marcus
|
BoltBait Moderator
|
posted September 04, 2009 09:56 AM

quote: Originally posted by Ml490: Any one know any tips and tricks to reduce teh heat generation on a laptop and to increase battery life?Thanks -Marcus
Buy Intel. __________________ Everyone you meet is going through something * BoltBait is the official holder of the MOTL Logout Button [Trades] [Rules] [FAQ] [Prices] [Card Searches] [Tools] [WotC] [Dominoes] [Art] [#MOTL Chat] [Logout]
|
Keaner Member
|
posted September 04, 2009 10:00 AM
  
quote: Originally posted by Ml490: Any one know any tips and tricks to reduce teh heat generation on a laptop and to increase battery life?Thanks -Marcus
Is it new or under warranty? If not you could always try upgrading your heat sync or CPU fan and slap on a fresh coat of thermal paste. Most laptops also draw in air from the bottom. You could get an external fan to put underneath the laptop. Something like this: http://pc-link.biz/pc/ncf02.jpg Keep in mind if you do get one of these you get one that has it's own power supply. You don't want to be drawing more power from your laptop if you are already having battery/heat issues.
[Edited 2 times, lastly by Keaner on September 04, 2009]
|
AlmasterGM Member
|
posted September 04, 2009 10:18 AM

quote: Originally posted by Ml490: Any one know any tips and tricks to reduce teh heat generation on a laptop and to increase battery life?Thanks -Marcus
Decrease heat - First, like Keaner said, many laptops rely on airflow from the bottom of the case. Slightly elevating your laptop and making sure you never use it on surfaces like a bed or cloth will greatly decrease heat. Second, in order to preserve battery and noise, many laptop fans are only set to activate when your laptop reaches a fairly high threshold temperature. There are many 3rd party applications you can grab that will allow you to customize how your fans will run. By having them start earlier and run faster, you can substantial decrease noticeable heat. Keep in mind, though, that if running on battery, this will reduce battery life. Increase battery life - First, the maximum capacity of rechargeable batteries decreases over time, so if your laptop is a year or older and you use it frequently, you might want to consider a replacement. Second, decreasing the amount of power your computer uses will increase the amount of battery life. This means that turning down screen brightness, making fewer read/writes to your hard drive, taxing you CPU less, and other such things will result in a longer battery.
 |
Ml490 Member
|
posted September 04, 2009 07:33 PM

Can someone explain what overclocking is?
|
TheMidnightBomber Member
|
posted September 04, 2009 10:06 PM

quote: Originally posted by Ml490: Can someone explain what overclocking is?
Over clocking is the practice of increasing the clock speed of hardware to increase performance. It increases heat and can be tough on hardware. As for your overheating question, in addition to other suggestions take a look at this guide: http://forum.notebookreview.com/showthread.php?t=235824 That has helped me a lot, my laptop is old and used to overheat when I watched movies on it. It's not particularly necessary to do all the testing they suggest, just download RM Clock, follow those instructions, and use common sense.
[Edited 1 times, lastly by TheMidnightBomber on September 04, 2009]
|
AlmasterGM Member
|
posted September 05, 2009 05:04 PM

quote: Originally posted by Ml490: Can someone explain what overclocking is?
In short, it's pushing your computer's hardware beyond the default factory limits so it performs better. Only some computers and some parts can be overclocked. If you overclock, you will increase the heat your computer gives off and shorten its life. Always be ABSOLUTELY 100% sure of what you are doing before you overclock. If you fail, you can damage part of or even your entire computer. A good analogy to overclocking (as it is somewhat difficult to conceptualize) is to imagine your computer as a tower of building blocks. The height of the tower represents performance, and its stability represents, well, stability. Your goal is to make the tower as high as possible without it falling over. By adding bricks, you decrease stability but increase performance. Taking bricks away produces the inverse results. Find the "sweet" spot" where both are optimized and you are in the money.
|
Volcanon Member
|
posted September 10, 2009 05:24 PM

How do I anonymize my connection on OSX? Do I need a service? Something preferably free - and not involving proxies from Russia.
|
Omega Member
|
posted October 13, 2009 07:23 PM
  
I believe wrong driver is installed for my network card. I'm using a HP pavilion dv6416ca model. The wireless network card should be a Broadcom. But in devices it says something NVDIA wireless controller. The wireless connection does not work. Cable connection work though any idea how to fix this? Robert
|
nderdog Moderator
|
posted October 13, 2009 07:56 PM
  
quote: Originally posted by Omega: I believe wrong driver is installed for my network card. I'm using a HP pavilion dv6416ca model. The wireless network card should be a Broadcom. But in devices it says something NVDIA wireless controller. The wireless connection does not work. Cable connection work though any idea how to fix this? Robert
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=ca&lang=en&product=3457736& should let you select your operating system and download the drivers for your wireless device. __________________ There's no need to fear, UNDERDOG is here!All your Gruul Nodorogs are belong to me. Trade them to me, please! Report rules violations. Remember the Auctions Board!
|
AlmasterGM Member
|
posted October 13, 2009 07:57 PM

quote: Originally posted by Omega: I believe wrong driver is installed for my network card. I'm using a HP pavilion dv6416ca model. The wireless network card should be a Broadcom. But in devices it says something NVDIA wireless controller. The wireless connection does not work. Cable connection work though any idea how to fix this? Robert
Reinstall the driver. You can probably get it from the manufacture's website (use your hardwire connection to get there).
|
Omega Member
|
posted October 13, 2009 08:06 PM
  
Yes, that's exactly what I tried. But the NVIDIA won'T go awayI run the .exe program from HP website, but the installation does nothing. Could it be the wireless function that is broken? IF so, how to verify? The light is still on though (blue = wireless works, orange = disabled, closed)
[Edited 1 times, lastly by Omega on October 13, 2009]
| |